Type F-1 Special

■Material : Glass fiber, epoxy fiber.
■Size : 　　FF：280m/m　F：290m/m　SS：300m/m　Ｓ：310m/m　M：320m/m　L：330m/m　
■Feature :　It sits down by the low center of gravity form, and there is a degree of an angle of
//////////inclination pleasantly from the seat of other company, and the vertical performance of
//////////the tire can be used well.　　　　　
。。。。。。　　(A thigh and so on doesn't make a sense of incongruity sleep, and it is installed.)
。。。/////The depth of the seat makes 175m/m (20m/m) deep, too.
　　　　　　　　Super Glass fiber which can guarantee a sense of stability, with epoxy fiber plastic,
　　　　　　　　the product layer
　　　　　　　　It became possible the supple movement and being compatible with the high force orepulsion .

It was smoother than the surface of before, and it could get luster.
The uniformity of the performance did UP specially further the plastic .

By the new way of making the product layer method of the manufacture process
Supermarket and the adhesion of the epoxy type plastic, 50% UP
The supple movement which can be made more thinly than the usual product,
and the durability of the performance improved.
　　　　　　　
■Price　　　JPY22,000

The design which supported a screwdriver's body in the surface was investigated
it was fully underst．ood in the details

Especially, the one that pain and a lump are made of the waist bone, the back,
and so on and which it is in trouble with
It is recommended to the one that it feels pain in the seat being used now in the body.

25m/m raises the part of the back.
(It is being made be to cheer up more efficiently in the back tire in the brake in the body.)
(Even the posture which slept and which supports a back easily.)
(The position of the lower center of gravity can be taken naturally.)

A part on the back makes the part of the backbone gentle, too.
(It is being made the form that it sleeps and even a posture is gentle to the backbone.)

A side part is made gentle inclination.
（It is being made the form which handle operation is made easily in.）

It was made to have the swell the part of the thigh .
(The support of the thigh is being made to increase.)

As it is necessary, the part whose hips are flat is made small.
(The line of the part behind the hips and the back is checked with the body.)
(The position where the part of the hips became stable and slept further can be taken.)

-

The R of the side part from the back was made gentle.
(It is trying to do a sense of incongruity isn't supported further in the screwdriver's body .)

The form of the waist bone of the part of the side was big, too, and it was swelled in the flat.
(It is trying so that it is fitted to all the screwdrivers.)

The depth of the part of the waist was made deep with 210m/m.
(It is trying to wrap it in the whole of the waist.)

R was a little given, and the former side of the flat part of the bottom was made
the form fitted to the thigh.
(Because it is here, the roundness of the bottom is being made hard to damage.)

It could be made in the pleasant form which it sat on.
It is the silhouette of the gentle ideal to the side, the back, the waist bone, and so on.
I can surely have it like it to everyone.

It is the design which doesn't give a frame strange stress.
It is recommended to everyone of the race participant specially.
Even a tall person can take a low profile.

In accordance with the Kart car seed car kind (frame), in accordance with the engine
of the participation category, the tire.
I can have super software, software, two kinds choose hardness from the inside.

Installation position reference example

2007　TONY RACER EVX　

（A）　585m/m　　（B）　590m/m
（C）　1025m/m　（D）　1040m/m
（E）　１0m/m

2007 FAKART VICTORY

（A）　705m/m　　（B）　705m/m
（C）　1050m/m　（D）　1040m/m
（E）　１0m/m

2006 INTREPID　CRUISER

（A）　720m/m　　（B）　710m/m
（C）　1080m/m　（D）　1055m/m
（E）　１0m/m

Mranello　RS-7 Racing

（A）　660m/m　　（B）　650m/m
（C）　1030m/m　（D）　1040m/m
（E）　0m/m

07 Tecno V12

（A）　565m/m　　（B）　m/m
（C）　1030m/m　（D）　m/m
（E）　10m/m

At any time, UP does the materials of each Kart frame.

Ask about it readily.

MAIL　To:FCS　　TEL：+81-6-6787-1515